Capture Clips & Specific Headsets

Most in-ear headsets fit in a BluBed, with many popular ones listed here.
Click here to let us know of others.

Capture Clip A

Capture Clip A has no back or front, so it doesn't matter which peg goes in which hole.

    • Plantronics Marque II, aka "the M165"
      • Great combination of style and performance
      • Dual-Mic Noise Canceling
      • Good Battery Life
        • Mid-priced headset
      • Plantronics Marque, M155
      • Plantronics A170: This is essentially the M165 Marque II as sold through Apple.
      • Plantronics Savor: Triple-mic noise canceling
      • Samsung HM1700
      • Motorola HK250 

    Capture Clip B

    Capture Clip B has a stepped profile to its capture walls to mate up with the Jabra's tapered barrel.  The wider end should be towards the back wall of the BluBed. You will see the letter B stamped into the clip's bottom left when installed properly.
      • Jabra Mini 
      • Jabra Classic
      • Samsung HM1300

    Capture Clip C

    Capture Clip C should be installed so its angled capture area angles away from the back wall of the BluBed.

      • Plantronics Voyager Edge
        • Great Looking
        • Triple-Mic
        • Advanced Noise Canceling, with dual ambient noise pickup
        • Longer boom reaches closer to the mouth
        • Premium priced headset
      • Plantronics Discovery 975
        • Longer boom reaches closer to the mouth
        • Premium priced headset
      • Plantronics Marque II, M165 fits in both Capture Clips A & C
      • Plantronics A170 fits in both Capture Clips A & C
      • Plantronics Marque, M155 fits in both Capture Clips A & C
      • Plantronics Savor fits in both Capture Clips A & C

    Get A Proper Fit

    Match your headset to the correct Capture Clip to get a proper fit.

    The barrel of your headset snaps into the Capture Clip when snapped into a BluBed.

    The headset barrel is the short tube that connects the ear-bud to the mic boom.  

    BluBeds come with three Capture Clips: A, B & C.

    Capture Clip A  

      • Capture Clips A & B look very similar, differing primarily in their throat size, allowing them to work with headsets of different barrel diameters.
      • Capture Clip B has a stepped profile in its capture area, to work with Jabra headset's tapered barrel. You will see the letter B stamped into the clip's bottom left when installed properly.
      • Capture Clip C has the same throat size as Capture Clip A, but is angled and captures the headset farther back to accommodate headsets with longer booms.

    Change A Capture Clip

    It's easy to switch Capture Clips.

    Install a Capture Clip by placing the BluBed on a table or other solid surface. Then press the clip's pegs into the holes in the base of the BluBed. They will snap in and be retained.

    Remove a Capture Clip by pressing the split-ends of its retention pegs on the bottom of the BluBed with the end of a pen. The Capture Clip can then be removed.